Shay
Matatar Mai ta amfani da na'ura mai aiki da karfin ruwa QF6806W25H1
Bayanin SamfuraBayyanar
Lambar sashi | QF6806W25H1 |
Matatar tacewa | Bakin ƙarfe/Fiberglass |
kwarangwal na ciki | Farantin da aka huda |
Zafin aiki | -30~+110℃ |
tambayoyin da ake yawan yi akai-akaiBayyanar
1. Wace illa matatun mai marasa inganci na hydraulic za su iya yi wa kayan aiki?
Tsaftacewa ita ce babbar matsala lokacin da man hydraulic ya shiga tsarin hydraulic don aiki.Gurɓatar ruwa ba shine abin da ke da datti da mutane ke tunani a kai ba, sai dai mai mai tsabta wanda a zahiri yake cike da dubban ƙwayoyin cuta.Tasirin tacewa na ƙarancin ingancin matattarar mai na hydraulic ba shi da kyau, kuma ba zai iya hana datti da sauran ƙazanta shiga tsarin hydraulic yadda ya kamata ba. Idan ƙananan ƙwayoyin cuta suka shiga tsarin hydraulic, za su yi karce famfon hydraulic (ana amfani da famfon plunger masu inganci sosai akan masu haƙa rami, lalacewa yana haifar da ƙarin sharewa, matsin lamba na hydraulic ba zai iya tashi ba, don haka yana aiki da rauni), toshe bawul ɗin, toshe tashar mai, kuma yana haifar da gazawar injin.
2. Ta yaya za a tantance ko sassan hydraulic sun lalace ta hanyar duba da maye gurbin abubuwan tace mai na hydraulic akai-akai?
Lokacin maye gurbin sinadarin tace mai na hydraulic, don Allah a duba ko akwai ƙwayoyin ƙarfe ko tarkace a ƙasan sinadarin tacewa. Idan akwai guntun tagulla ko na ƙarfe, yana nuna cewa famfon hydraulic, injin hydraulic ko bawul na iya lalacewa ko kuma za su lalace. Idan akwai ƙwayoyin roba, yana nuna cewa hatimin silinda na hydraulic ya lalace.
3. Bambanci tsakanin kayayyakin fiberglass da takarda tace ruwa ta yau da kullun
Wasu daga cikin kayayyakin kamfaninmu an yi su ne da kayan fiberglass tare da ingantaccen tacewa. Idan aka kwatanta da takardar tacewa ta hydraulic ta yau da kullun (takardar tacewa ta katako ta yau da kullun, wacce kauri na zare na itacenta ya iyakance, daidaiton tacewa yana da iyaka, yayin da fiberglass yana da zare masu kyau, don haka yana iya samun daidaiton tacewa mafi girma), kayan fiberglass suna da daidaiton tacewa mafi girma da kuma juriya ga matsin lamba mai ƙarfi.
-Inganta aikin tsarin hydraulic
- Tsawon rayuwar sabis na kayan aiki da injuna
- Rage haɗarin matsaloli da rashin aiki a lokacin aiki
-Rage farashin gyara da gyara
-Inganta ingancin makamashi
HANYOYIN WANKEWABayyanar
1. Shiri kafin tsaftacewa: Da farko, ya zama dole a saita bambancin matsin lamba na bangaren tacewa sannan a ajiye rikodi.Wannan yana taimakawa wajen fahimtar yanayin tsaftacewa da kuma tasirin sinadarin tacewa.
2. Tsaftace waje da ciki: Yi amfani da bindiga mai ƙara girman gilashi sau 30 don duba tsaftar ciki, waje, da saman kowane abu mai tacewa.Wannan yana taimakawa wajen tabbatar da tsaftace sinadarin tacewa sosai.
3. Wanke Alkaline: Sanya sinadarin tacewa a cikin abin tsaftace jiki mai zafi sosai, sannan a ƙara wasu magungunan alkaline da kuma sinadaran tsaftacewa (kamar NaOH, NatCONaiPO4) don cire tabon mai, coke, da sauran ƙazanta.A bar zafin jiki ya kai digiri 90-105 na tsawon awanni 24-48.
4. Jiƙa CCL: Bayan wanke alkaline, sanya sinadarin tace mai na hydraulic a cikin ruwan wanke mota na CCL don tsaftace kwalta da foda na coke da ke ratsa ta cikin abin tace tanki.A wanke a zafin ɗaki na tsawon awanni 20-24 domin tabbatar da cewa sabulun yana shiga kowace ƙaramar kusurwa.
5. Maganin tsinken tsinkewa: Bayan an jiƙa a cikin CCL, a zafafa sinadarin tacewa a cikin motar tsaftacewa zuwa 120-130 ℃ sannan a jiƙa na tsawon awanni 4-8 don cire gurɓataccen iskar carbon daga kayan.Sai a yi amfani da kayan feshi masu daidaita matsin lamba don wankewa, daga ciki zuwa waje, kowanne bututu na sinadarin matattara, tare da lokacin tsaftacewa na mintuna 30 ga kowane bututu.
Bayani
Idan zafin mai ya wuce 10 ℃, injin turbin iska yana aiki.
Lokacin da zafin mai ya kai 40 ℃ kuma bambancin matsin lamba tsakanin shigarwa da fitarwa na matatar ya wuce sandar 3, bambancin matsin lamba yana aika sigina
Na'urar tana fitar da siginar ƙararrawa, wanda ke haifar da maye gurbin abin tacewa.Idan zafin mai ya kai ≤ 40 ℃, yi watsi da matsin lamba
Siginar ƙararrawa da mai watsawa daban-daban ke watsawa.
Idan zafin mai ya wuce digiri 55 na Celsius, mai yana ratsawa ta cikin mai sanyaya don sanyaya, kuma lokacin da zafin mai ya faɗi zuwa
A zafin jiki na 45 ℃, mai yana gudana kai tsaye zuwa cikin akwatin gear.
Na'urar firikwensin matsin lamba na fitar da famfo ko ma'aunin matsin lamba, wanda ake amfani da shi don gano matsin lambar tsarin, tsarin
An saita bawul ɗin aminci zuwa matsin lamba na mashaya 12. Idan matsin lambar da aka gano ya wuce mashaya 12, bawul ɗin aminci yana nan
Bawul ɗin yana buɗewa kuma tsarin ya cika.
