Sida Loo Doorto Shaandheeye Ku Habboon Sintered

1. Sharax xaaladaha codsiga iyo shuruudaha
Nooca dhexdhexaadka ah: dareere (biyo, saliid, xal kiimiko, iwm.) ama gaas (hawada, uumiga, iwm.).

Ujeeddada shaandhaynta: in laga saaro walxaha, noolaha yaryar, wasakhda saliidda, adkaha la hakiyey, ama la gaaro kala soocid sax ah.

Shuruudaha warshadaha:

Kiimiko/Warshado: Waxay u adkaysataa asiidhyada xooggan, alkaliyada xooggan, ama jawiga heerkulka sare iyo cadaadiska sare.

2. Go'aami saxnaanta shaandhaynta (micrometers)

Cabbirka walxaha: Dooro saxnaanta iyadoo lagu saleynayo cabbirka walxaha ugu yar ee la joojinayo (sida 1 μm, 5 μm, 10 μm, iwm.).

Shaandhaynta qallafsan (>50 μm): waxay ilaalisaa qalabka hoos yimaada.

Shaandhaynta saxda ah (1-50 μm): waxay ka saartaa walxaha yaryar.

Shaandheyn aad u sax ah (

Awoodda haynta wasakhda iyo daloolinta: Fosfiyada sare (sida 60% -80%) waxay hagaajin kartaa awoodda haynta wasakhda waxayna dheereyn kartaa cimriga.

3. Dooro walxaha shaandhada

Bir aan miridh lahayn (304/316L):

Iska caabin heerkul sare (ilaa 500 ℃), cadaadis sare, iska caabin daxalka, oo ku habboon warshadaha kiimikada iyo dawooyinka.

Si joogto ah ayaa loo nadiifin karaa waxayna leedahay cimri dheer.

Naxaas: waa mid dhaqaale ahaan wanaagsan oo ku habboon sifeynta hawada ama biyaha cadaadiska hooseeya.

Maaddooyinka Polymer-ka (PE, PP, PTFE):

Aashitada iyo alkali u adkaysta, oo ku habboon cuntada iyo daawooyinka (oo u baahan shahaado heer cunto ah).

PTFE waxay u adkaysataa heerkulka sare waxayna leedahay awood la'aan kiimiko oo xooggan.

Dhoobada: waxay u adkaysataa heerkulka sare, si isdaba joog ah ayaa loo nadiifin karaa, laakiin waxay leedahay jajab sare.

4. Qiimee xuduudaha jawiga shaqada

Heerkulka: Alaabada polymer-ka badanaa waxay leeyihiin iska caabin heerkul ah

Cadaadis:

Deegaan cadaadis hooseeya (

Deegaan cadaadis sare leh (> 1MPa): Bir aan miridh lahayn ama qaab-dhismeed la xoojiyay ayaa loo baahan yahay.

Waafaqsanaanta kiimikada: Hubi in walaxda shaandheyntu ay u adkeysan karto asiidhyada, alkalisyada, dareerayaasha, iwm. ee ku jira dhexda.

5. Dheelitirka hoos u dhaca socodka iyo cadaadiska

Baahida socodka: Dooro cabbirka shaandhada (dhererka, dhexroorka) iyadoo lagu saleynayo socodka nidaamka si looga fogaado hoos u dhaca cadaadiska xad-dhaafka ah ee ka dhasha heerka socodka sare.

Xaddidaadda hoos u dhaca cadaadiska: Kartoomada shaandhada ee saxda ah ee sare waxay kordhin karaan hoos u dhaca cadaadiska, waana lagama maarmaan in la hubiyo in bamka nidaamku uu u adkeysan karo.

6. Naqshadeynta qaab-dhismeedka

Kala-soocidda lakabyo badan leh: Qaab-dhismeedka daloolada Gradient wuxuu hagaajin karaa nuugista wasakhda iyo cimriga.

Daawaynta dusha sare: Nadiifinta elektrolitik ee kartoonada shaandhada birta aan miridhku lahayn waxay yareyn kartaa xirmidda.

Qaabka Isku-xirka: Isku-xirka nidaamka isku-dhafka ah (sida dunta NPT, flange, isku-xirka degdegga ah).

7. Dayactirka iyo Kharashka

Habka Nadiifinta: Kartoonada shaandhada birta aan lahayn ama dhoobada ah waxaa lagu nadiifin karaa nadiifinta ultrasonic ama dib-u-dhaqidda, halka kartoonada shaandhada polymer-ka inta badan la tuuri karo.

Kharashka cimriga: Kaarbooradaha shaandhaynta leh kharash yar oo bilowga ah laakiin u baahan beddel joogto ah waxay yeelan karaan kharash guud oo sarreeya.