Leave Your Message

Return RF-240×20 Oil Filter - High Quality

This kind of filter is used in the hydraulic system for fine filtration.The filter can filter metal impurity,rubber impurity or other contamination,and keep the tank clean.If no service is done and as the pressure reaches to 0.4Mpa,the by-pass valve will open.Filter radio β3,5,10,20>200,filter efficiency n≥99.5%,and fit the ISO standard.

    Product SpecificationsHuahang

    model

    Nominal flow rate (L/min)

    Filtration accuracy (μm)

    Drift diameter (mm)

    Press

    (MPa)

    Pressure loss (MPa)

    Transmitting device (V/W)

    Weight (Kg)

    Filter element model

    Initial

    Max.

    (V)

    (A)

    RF-60X*

    60

    1

    3

    5

    10

    20

    30

    20

    1

    ≤0.07

    0.35

    12

    24

    36

    220

    2.5

    2

    1.5

    0.25

    0.4

    GY0060R*BN/HC

    RF-110X*

    110

    20

    0.9

    GY0110R*BN/HC

    RF-160X*

    160

    40

    1.1

    GY0160R*BN/HC

    RF-240X*

    240

    40

    1.8

    GY0240R*BN/HC

    RF-330X*

    330

    50

    2.3

    GY0330R*BN/HC

    RF-500X*

    500

    50

    3.2

    GY0500R*BN/HC

    RF-660X*

    660

    80

    4.1

    GY0660R*BN/HC

    RF-850X*

    850

    80

    13

    GY0850R*BN/HC

    RF-950X*

    950

    90

    20

    GY0950R*BN/HC

    RF-1300X*

    1300

    100

    41.5

    GY1300R*BN/HC

    Huahang Supply Return Filter RF-240×20Huahang Supply Return Filter RF-240×20Huahang Supply Return Filter RF-240×20

    Product featuresHuahang

    1. This filter is equipped with a permanent magnet, which can filter out ferromagnetic particles of more than 1 micron in the oil
    2. The filter element is made of glass fiber, which has the advantages of high filtration accuracy, large oil flow capacity, small original pressure loss, and large pollutant absorption. Its filtration accuracy is calibrated with absolute filtration accuracy for filtration ratio β 3/10/20 ≥ 200, in compliance with ISO standards
    3. Equipped with a check valve: The filter is placed on the side and bottom of the fuel tank, and when replacing the filter element, the oil in the tank will not flow out

    4. The feature of easy installation, connection, and replacement of filter elements is that the oil inlet is flange connected. For the installation flange between the filter head and the oil tank, users can design and process 6 flange screw holes on the mailbox board according to the dimensions in the chart. Loosen the top cover of the filter to replace the filter element or add oil to the fuel tank

    Product ApplicationHuahang

    Widely used in hydraulic systems such as heavy machinery,mining machinery and metallurgical machinery.