Air Compressor Separator Filter 1101900010

This filter is specifically designed for use with Huahang Air Compressor models, and it offers high-efficiency filtration. Made from high-quality materials and built to last, this filter's design ensures that it can withstand any harsh working environment while maintaining its performance.

Product Details

Product SpecificationsHuahang

Dimension	Standard
Application	Oil gas separation
Hole	Elliptical flange hole
Custom made	Avaliable

Huahang Air Compressor Separator Filter 1101900010 (4)65g

Huahang Air Compressor Separator Filter 1101900010 (5)j3o

Huahang Air Compressor Separator Filter 1101900010 (6)lz8

working principleHuahang

The air compressed from the head of the compressor host carries oil droplets of different sizes. Large oil droplets are easy to separate through the oil and gas separation tank, while small oil droplets (suspended) must be filtered through the micrometer sized fiberglass filter material of the oil and gas separation filter element. The correct selection of fiberglass diameter and thickness is an important factor in ensuring filtration efficiency. After the oil mist is intercepted, diffused, and polymerized by the filter material, small oil droplets quickly aggregate into large oil droplets, which pass through the filter layer under the action of aerodynamics and gravity and settle at the bottom of the filter element. These oils are continuously returned to the lubrication system through the inlet of the return pipe at the bottom of the filter element, allowing the compressor to discharge relatively pure and high-quality compressed air.

precaustionsHuahang

When the pressure difference between the two ends of the oil and gas separation filter reaches 0.15MPa, it should be replaced; When the pressure difference is 0, it indicates that the filter element is faulty or the airflow is short circuited. In this case, the filter element should also be replaced. The general replacement time is 3000-4000 hours. If the environment is poor, its usage time will be shortened.

When installing the return pipe, it must be ensured that the pipe is inserted into the bottom of the filter element. When replacing the oil and gas separator, pay attention to static discharge and connect the inner metal mesh with the outer shell of the oil drum.