Replace Hydraulic Oil Filter Element 0100MX003BN4HCB35
Product SpecificationsHuahang
Part number |
0100MX003BN4HCB35 |
End caps |
Carbon steel |
Dimension |
Standard/Customized |
Filter layer |
Fiberglass/Stainless steel |
Filtration accuracy |
10 μm |
Precautions Before UseHuahang
1. Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
Replacement cycleHuahang
The replacement cycle of hydraulic oil filter element will be comprehensively considered based on factors such as frequency of use, degree of hydraulic oil pollution, and working environment, and there is no fixed time.
In general, the replacement cycle of the hydraulic oil suction filter is every 2000 working hours, and the replacement cycle of the hydraulic return filter is every 250 working hours for the first time and every 500 working hours thereafter.
If the working environment is harsh and frequent replacement of filter elements can affect production, it is recommended to regularly take hydraulic oil samples to test the cleanliness of the liquid, and then determine a reasonable replacement cycle.
The replacement cycle of hydraulic oil filter element will be comprehensively considered based on factors such as frequency of use, degree of hydraulic oil pollution, and working environment, and there is no fixed time.
In general, the replacement cycle of the hydraulic oil suction filter is every 2000 working hours, and the replacement cycle of the hydraulic return filter is every 250 working hours for the first time and every 500 working hours thereafter.
If the working environment is harsh and frequent replacement of filter elements can affect production, it is recommended to regularly take hydraulic oil samples to test the cleanliness of the liquid, and then determine a reasonable replacement cycle.
1. Electronics and pharmaceuticals: pre-treatment filtration of reverse osmosis water and deionized water, pre-treatment filtration of detergent and glucose.
2. Thermal power and nuclear power: purification of lubrication systems, speed control systems, bypass control systems, oil for gas turbines and boilers, purification of feedwater pumps, fans, and dust removal systems.
3. Mechanical processing equipment: lubrication systems and compressed air purification for papermaking machinery, mining machinery, injection molding machines, and large precision machinery, as well as dust recovery and filtration for tobacco processing equipment and spraying equipment.