Shay
High Flow Filter Element 159x1535
Product SpecificationsHuahang
End caps |
Reinforced nylon |
Skeleton |
Plastic |
Interface |
Reinforced nylon |
Filter layer |
304 Stainless steel mesh |
Working principleHuahang
1. Allowing high flow media to pass through the filter material has advantages such as high efficiency, low pressure loss, and long service life.
2. The external inlet and internal outlet structure of the high flow filter element makes it easy to replace the filter element, while keeping pollutants intercepted on the outside of the filter element.
3. The filter element has a PP support skeleton inside, which can withstand a maximum pressure difference of 0.245MPa.
4. Filter element β Value above 1000.
5.Multiple filter cartridges can be installed in the filter housing, which can be used in a wide flow range, whether starting or continuous operation.
6.The filter element is durable and can be equipped with the least and most economical filter
◆ Allowing high flow media to pass through the filter material has advantages such as high efficiency, low pressure loss, and long service life.
◆ The external inlet and internal outlet structure of the high flow filter element makes it easy to replace the filter element, while keeping pollutants intercepted on the outside of the filter element.
◆ The filter element has a PP support skeleton inside, which can withstand a maximum pressure difference of 0.245MPa.
◆ Filter element β Value above 1000.
◆ Multiple filter cartridges can be installed in the filter housing, which can be used in a wide flow range, whether starting or continuous operation.
1. Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
rAplacement methodHuahang
The replacement method for the front three-stage filter element:
During this process, water usually spills out. Please prepare cleaning tools such as a water basin or towel:
(a) Turn off the electroplated ball valve and pressure bucket ball valve;
(b) Turn on the goose neck faucet to drain any remaining water from the pipeline;
(c) After the water no longer flows out, use a filter housing wrench to open the filter housing containing the filter element;
(d) Remove the old high flow filter element and install a new filter element of the same specification;
(e) Apply lubricant to the black O-ring above the filter housing, and then place the O-ring into the groove in the filter housing.
(f) Tighten the filter housing vertically and try to avoid shifting the O-ring as much as possible.
(g) Open the electroplated ball valve and pressure bucket ball valve.