LF High Pressure Line Oil Filter Series

LF series filter can be installed in the pressure line of hydraulic system with different pressure of high pressure type,and used in the pressure line of hydraulic system.It can remove all the contaminants from the hydraulic system.The element of this series is made of glass fiber,it has high efficiency and filtration,large dirt capacity and low initial pressure drop.

Product Details

Product SpecificationsHuahang

Model	Flow rate L/min	Filtr.(μm)	Dia.(mm)	Model of element	Connect
LF-30×*P	30	3 5 10 20	15	SC0030D*BN/HC	Thread
LF-60×*P	60		20	SC0060D*BN/HC
LF-110×*P	110		25	SC00110D*BN/HC
LF-160×*P	160		32	SC00160D*BN/HC
LF-240×*P	240		40	SC00240D*BN/HC
LF-330×*P	330		50	SC00330D*BN/HC	Flange
LF-500×*P	500		65	SC0500D*BN/HC
LF-660×*P	660		90	SC00660D*BN/HC
LF-800×*P	700		90	SC00700D*BN/HC
Note: * is filtration accuracy. If the filter fluid is water-glycol, flow rate 160L/min, filtration accuracy 80μm,and the filter equipped and with indicator ,the model of filter is LF-30×P,the model of element is SC0030DBN/HC.

Product featuresHuahang

The pressure line filter can be installed on pressure lines of different pressure levels to further remove or block the wear caused by the outside being brought into the working of the component, as well as the impurities generated by the chemical action of the medium itself. Especially suitable for automatic control systems and servo systems. It prevents premature wear or seizure of high-precision control and actuator components due to contamination, which reduces faults and extends component life.

1. Compared with the same flow filter, the structure is compact and small.

2. The pressure range is wide

3. Easy to change filter

4.High filtration precision

5.strong oil-passing capacity

6.small original pressure loss

7.large amount of dirt