Oil Separator Filter Element 43x304

Crafted from top-grade materials and manufactured with precision, this oil separator filter is designed to provide consistent and reliable filtration for even the most demanding uses. With its advanced design and robust construction, it is capable of withstanding the rigors of heavy use and long-term operation, making it an ideal choice for industrial environments.

Product Details

Product SpecificationsHuahang

Product Attribute	Specification
Dimension	190x300x366
Media	Composite parts
End caps	Carbon steel
Skeleton	Zinc infiltrated diamond mesh

Huahang Supply Oil Separator Filter 43x304 (5)kjd

Huahang Supply Oil Separator Filter 43x304 (6)vcg

Huahang Supply Oil Separator Filter 43x304 (7)4ma

working principleHuahang

The compressed air oil-water separator is composed of an outer shell, a cyclone separator, a filter element, and drainage components. When compressed air containing a large amount of solid impurities such as oil and water enters the separator and rotates down its inner wall, the centrifugal effect generated causes oil and water to precipitate from the steam flow and flow down the wall to the bottom of the oil-water separator, which is then finely filtered by the filter element. Due to the use of coarse, fine, and ultra-fine fiber filter materials stacked together, the filter element has a high filtration efficiency (up to 99.9%) and low resistance. When gas passes through the filter element, it is firmly adhered to the filter material fibers due to the obstruction of the filter element, inertial collision, van der Waals forces between molecules, electrostatic attraction, and vacuum attraction, and gradually increases into droplets. Under the action of gravity, it drips into the bottom of the separator and is discharged by the drain valve.

precaustionsHuahang

When the pressure difference between the two ends of the oil and gas separation filter reaches 0.15MPa, it should be replaced; When the pressure difference is 0, it indicates that the filter element is faulty or the airflow is short circuited. In this case, the filter element should also be replaced. The general replacement time is 3000-4000 hours. If the environment is poor, its usage time will be shortened.

When installing the return pipe, it must be ensured that the pipe is inserted into the bottom of the filter element. When replacing the oil and gas separator, pay attention to static discharge and connect the inner metal mesh with the outer shell of the oil drum.