Leave Your Message
Products Categories
Featured Products

Replace Arg Oil Filter Element P3072062

Simply remove the old filter element and replace it with the P3072062 filter element to ensure a secure installation. Regularly replacing the oil filter element will extend the service life of the equipment and improve overall performance.

  • Type Replace Arg oil filter element
  • Filter media Yellow filter paper
  • Part number P3072062
  • End caps Carbon steel
  • Filtration accuracy 25μm
  • Maximum working pressure difference 21 bar
  • Sealing ring NBR

Product Specifications

Huahang

End caps

carbon steel

Filter layer

Yellow filter paper

PART NUMBER

P3072062

Filtration accuracy

25μm

Sealing ring

nbr

1. Special design can achieve an effective filtration area of 100%;


2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;


3. The design adopts a metal folding frame, which can be reused and replaced;


4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;

Special design can achieve an effective filtration area of 100%;


2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;


3. The design adopts a metal folding frame, which can be reused and replaced;


4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;

Optional part number
Huahang

V3062053

V3082326

P2.0617-02

P3.0613-52

V3062056

V3083303

P2.0617-11

P3.0620-51

V3062058

V3083306

P2.0717-01

P3.0620-52

V3062088

V3083308

P2.0717-02

P3.0623-02

V3062303

V3083313

P2.0833-01

P3.0623-11


Product Shooting

0110R003BNHC 0110R005BNHC 0110R010BNHC 0110R020BNHC 
0110R003BN3HC 0110R005BN3HC 0110R010BN3HC 0110R020BN3HC 
0110R003BN4HC 0110R005BN4HC 0110R010BN4HC 0110R020BN4HC 2. Acid cleaning method


Dissolve potassium dichromate or crystals in water to 60 to 80 degrees, and slowly add concentrated sulfuric acid with a concentration of 94% until sufficient. Add slowly and stir. Add up to 1200 milliliters of potassium sulfate or completely dissolve, and the solution will appear dark red in color. At this time, the rate of adding concentrated sulfuric acid can be accelerated until it is completely added. If there are still undissolved crystals after adding concentrated sulfuric acid, they can be heated until dissolved. The function of cleaning solution is to remove general pollutants, grease, and metal particle impurities on the wall of stainless steel filter cartridge, and it can effectively kill the bacteria and microorganisms that grow on the filter cartridge and damage the heat source. If the filter element has been alkaline washed before, the alkaline solution must be washed first, otherwise fatty acids will precipitate and contaminate the filter elementSFN-02-60K SFN-02-100K SFN-02-150K SFN-02-200K

    Send Inquiry