High Flow Filter Element 152x620

The High Flow Filter Element 152x620 is compatible with a wide range of filter housings, making it easy to install and replace. It is also available in different micron ratings, ensuring that users get the right filter element for their specific application and needs.

Product Details

Product SpecificationsHuahang

End caps	PP
Sealing ring	NBR
Filtration accuray	1~50 μm
Connection method	Ultrasonic hot melt

Working principleHuahang

The principle of operation of the high flow filter cartridge is based on the depth filtration process. The liquid is fed into the cartridge via an inlet port and passes through the outermost layer of the filtration media. As the flow rate increases, the layers of filtration media remove the impurities more efficiently. Due to the large surface area of the filter media, the flow rate is maintained, and the pressure drop across the filter is much lower as compared to conventional filters.

1. Special design can achieve an effective filtration area of 100%;

2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;

3. The design adopts a metal folding frame, which can be reused and replaced;

4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;

Special design can achieve an effective filtration area of 100%;

2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;

3. The design adopts a metal folding frame, which can be reused and replaced;

4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;

rAplacement methodHuahang

The replacement method for the front three-stage filter element:

During this process, water usually spills out. Please prepare cleaning tools such as a water basin or towel:

(a) Turn off the electroplated ball valve and pressure bucket ball valve;

(b) Turn on the goose neck faucet to drain any remaining water from the pipeline;

(c) After the water no longer flows out, use a filter housing wrench to open the filter housing containing the filter element;

(d) Remove the old high flow filter element and install a new filter element of the same specification;

(e) Apply lubricant to the black O-ring above the filter housing, and then place the O-ring into the groove in the filter housing.

(f) Tighten the filter housing vertically and try to avoid shifting the O-ring as much as possible.

(g) Open the electroplated ball valve and pressure bucket ball valve.