Shay
Non-standard size:
Special sizes are produced according to customers' drawings or technical parameters.
100μm Stainless Steel Mesh Oil Filter 28x95
Product Specifications
Huahang
Type
Stainless Steel oil filter element
Filter layer
304 Stainless steel mesh
Filtration accuracy
1~100 mesh
dimension
22x43.5 mm
Package
Neutral carton package
Type |
Stainless Steel oil filter element |
Filter layer |
304 Stainless steel mesh |
Filtration accuracy |
1~100 mesh |
dimension |
22x43.5 mm |
Package |
Neutral carton package |
how to prevent hydraulic oil filter leakage
HUAhANG
Preparation: Before replacing or maintaining the hydraulic oil filter, ensure you have all necessary tools, such as wrenches and filter wrenches. Also, prepare a catch container to collect any used oil.
Shutting Down the System: Before beginning any work, always shut down the hydraulic system and release any pressure. This is for safety reasons and to prevent accidental leaks during operation.
Removing the Old Filter: Use a filter wrench to remove the old filter by turning it counterclockwise. A small amount of oil may leak during removal, so take precautions.
Cleaning the Installation Location: After removing the old filter, be sure to clean the installation location. Ensure there are no impurities or residual sealant to prevent leaks after installing the new filter.
Installing the New Filter: Before installing the new filter, apply engine oil to the seal to lubricate and reduce friction. Then, tighten the new filter clockwise until the seal contacts the mounting surface. Tighten gently with the tool, but avoid excessive force to avoid damaging the filter.
Checking for Leaks: After installation, start the hydraulic system and check for leaks. Check the area around the filter element and at the pipe connections to ensure there is no oil leakage.
Maintenance and Care: Regularly inspect all hydraulic system components, including the filter element. Replace damaged or aged seals promptly to keep the system clean and in good working order.
1. Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
0110R003BNHC 0110R005BNHC 0110R010BNHC 0110R020BNHC
0110R003BN3HC 0110R005BN3HC 0110R010BN3HC 0110R020BN3HC
0110R003BN4HC 0110R005BN4HC 0110R010BN4HC 0110R020BN4HC 2. Acid cleaning method
Dissolve potassium dichromate or crystals in water to 60 to 80 degrees, and slowly add concentrated sulfuric acid with a concentration of 94% until sufficient. Add slowly and stir. Add up to 1200 milliliters of potassium sulfate or completely dissolve, and the solution will appear dark red in color. At this time, the rate of adding concentrated sulfuric acid can be accelerated until it is completely added. If there are still undissolved crystals after adding concentrated sulfuric acid, they can be heated until dissolved. The function of cleaning solution is to remove general pollutants, grease, and metal particle impurities on the wall of stainless steel filter cartridge, and it can effectively kill the bacteria and microorganisms that grow on the filter cartridge and damage the heat source. If the filter element has been alkaline washed before, the alkaline solution must be washed first, otherwise fatty acids will precipitate and contaminate the filter element.
Size And Specification Customization
-
-
Standard part number
We can produce according to the standard models you provide
Material Customization
-
Different materials:
There are several materials such as glass fiber, oil filter paper, air filter paper, non-woven fabric, polyester cloth and stainless steel mesh, which can be selected according to customer requirements and working conditions.
-
End Caps Customization
-
Material of end caps:
End cap material types include: carbon steel, stainless steel, aluminum, ABS, nylon, plastic
-
Connection mode and structure optimization
-
Connection types:
Interface types include: threaded interface, snap-in interface, 222/226 interface, flange interface, flat seal interface, and Pagoda head interface.
-
