PTFE Air Filter Cartridge 42x80
Product SpecificationsHuahang
Dimension |
42x80 |
Filter layer |
PTFE membrane |
Inner skeleton |
304 punched plate |
Outer skeleton |
304 diamond mesh |
End caps |
304 |
Product FeaturesHuahang
(1) Excellent chemical stability: It exhibits inertness, resistance to strong acids (excluding hydrofluoric acid), strong alkalis, aqua regia, and various organic solvents for most chemical drugs and solvents.
(2) Higher friction coefficient: It is one of the lowest friction coefficients among solid materials (0.05-0.11), and can be used as a sliding or rotating body, with the smallest friction coefficient among plastics.
(3) Low thermal expansion rate: When the temperature is below 260 ° Ch, only 1/100~1/1000 of the metal is larger; Between 300 and 600 ° Ch, it ranges from 1 × 10-6 to 1 × 10-8/m · K-1, and is one of the materials known to have low thermal expansion rates in plastics.
(4) Good self-lubricating and non adhesive properties: its dynamic friction coefficient is about 0.5 (under water lubrication conditions); The static friction moment is only 2/5 of the contact area between steel and steel; The surface is smooth and not easily adhered to pollutants such as dust and oil in the air.
(5) Odorless, odorless, and non-toxic.
maintainHuahang
1. The filter element is the core component of a filter, made of special materials and is a vulnerable part that requires special maintenance and upkeep;
2. After a long period of operation, the filter element has intercepted a certain amount of impurities, which can lead to an increase in pressure and a decrease in flow rate. At this time, it is necessary to clean it in a timely manner;
3. When cleaning, be sure not to deform or damage the filter element.
The filter paper in the equipment is also one of the key factors. High quality filter equipment usually uses ultra-fine fiber paper filled with synthetic resin, which can effectively filter impurities and has strong pollution retention capacity. According to relevant statistics, a passenger car with an output power of 180 kilowatts can filter out approximately 1.5 kilograms of impurities during its 30000 kilometer journey. In addition, the equipment also has a high requirement for the strength of the filter paper. Due to the high air flow rate, the strength of the filter paper can resist strong airflow, ensure filtration efficiency, and extend the service life of the equipment