Matatar Mai Layin Dawowa RLF-110x30P

Lura:* daidaiton tacewa ne. Idan ruwan tacewa ruwa ne-glycol, matsin lamba na amfani 1.6 Mpa, ƙimar fure 60 L/min, daidaiton tacewa 10 μm kuma tare da alamar CMS. Samfurin matatar shine RLF·BH-H60x10P, samfurin abun shine SFX·BH-60X10

1. Mai sauƙin shigarwa, sauƙaƙa bututun tsarin: Ana sanya matatar a kan murfin tankin mai, kan matatar yana bayyana a wajen tankin mai, jikin silinda mai dawowa yana nutsewa a cikin tankin mai, kuma an sanya matatar mai a cikin nau'in bututu da haɗin flange, don haka yana sauƙaƙa bututun tsarin, yana sa tsarin tsarin ya fi ƙanƙanta, shigarwa da haɗi ya fi dacewa.

2. An sanye shi da na'urar watsawa da ke toshe gurɓataccen abu na tacewa da kuma bawul ɗin wucewa, wanda zai iya inganta amincin tsarin hydraulic. Lokacin da aka toshe abin tacewa ta hanyar gurɓatattun abubuwa ko kuma matsin lamba na mai ya kai 0.35Mpa saboda ƙarancin zafin jiki na ruwa na tsarin, bugun kwararar ruwa da sauran abubuwa, na'urar watsawa za ta aika da sigina wanda ke nuna cewa ya kamata a maye gurbin abin tacewa ko kuma a ƙara zafin akan lokaci. Idan ba za a iya kashe na'urar nan take don magance waɗannan kurakurai a wannan lokacin ba, bawul ɗin wucewa akan abin tacewa zai buɗe ta atomatik (bambancin matsin lamba na buɗewa shine 0.4MPa) don kare aikin yau da kullun na na'urar tacewa da tsarin hydraulic.

3. Tsarin ya ɗauki matatar mai kai tsaye, wanda hakan ya sa ya zama da sauƙi a maye gurbin matatar ko a ƙara mai a cikin tankin mai: kawai a buɗe murfin matatar (murfin tsaftacewa) don maye gurbin matatar ko a cika tankin, kuma an saita tashoshin mai guda biyu na M18 x 1.5 a kan matatar, waɗanda za a iya amfani da su don shigar da mai watsawa a kowane gefe ko kuma ƙaramin adadin mai a cikin tsarin zai iya komawa cikin tankin don tacewa.

4. Tare da mai watsa ruwa: TAna shirya mai watsawa a ƙasan silinda mai dawowa, wanda zai iya sa mai ya dawo da matsakaicin kwararar ruwa cikin tankin mai kuma ba shi da sauƙin samar da kumfa, don rage sake shigar iska da kuma rage tasirin gurɓatattun abubuwa da aka tara.

5. An yi sinadarin matatar ne da zare na sinadarai:Wanda ke da fa'idodin ingantaccen tacewa, babban ƙarfin wucewar mai, ƙaramin asarar matsi na asali, ƙarfin ɗaukar gurɓataccen abu da sauransu. Daidaiton tacewa ana daidaita shi ta hanyar cikakken daidaiton tacewa, rabon tacewaβ3,5,10,20≥200, ingancin tacewa N≥99.5%, daidai da ƙa'idodin ISO.