Custom Oil Filter Element 76x105

With a unique design that allows for better flow and higher filtration efficiency, our Custom Oil Filter Element 76x105 is the ideal choice for use in a wide range of industrial applications. Whether you need a filter that can handle high temperatures, high pressure or harsh chemicals, our product is guaranteed to meet all your needs.

Product Details

Product SpecificationsHuahang

Dimension	76x105
Filter layer	201 stainless steel mesh
Skeleton	Galvanized diamond mesh
End caps	Carbon steel

HOW TO LOAD AND UNLOAD HYDRAULIC OIL FILTERHuahang

1. Preparation work. Turn off the device power and wait for the hydraulic oil to drop to room temperature; Prepare the necessary tools, such as telescopic arms, wrenches, screwdrivers, etc; Refer to the manual of the hydraulic system and filter to understand the steps and precautions for disassembly and installation.

2. Prepare for disassembly. Position the hydraulic oil filter to ensure that there are no hazardous materials or tools in the operating area; Clean the area around the filter with an oilcloth and keep it clean and hygienic; Loosen the screws on the inlet and outlet pipes, and guide the oil in the pipes into the container.

3. Dismantling process. Use a telescopic arm to remove the hydraulic oil filter, paying attention to the correctness of the threads; Use a wrench or wrench driver to unscrew the coupling and bearing plate of the hydraulic oil filter; Remove the panel and put the old filter element into the waste bin; Check the sealing gasket and sealing ring, and prepare for replacement. twelve

4. Replace the filter element. Check the filter holder, and if there is any damage, repair or replace it; Use specialized tools to remove the old filter element; Install a new filter element and pay attention to the correct position of the upper sealing ring. twenty-three

5. Install a new filter element. Tighten the drain plug and cover the upper end cover; Pay attention to packing the sealing ring and tighten the nut.

6. Next steps. Close the inlet ball valve and open the upper end cover; Remove air from the system and check the hydraulic oil level

ADVANTAGES

1. Excellent anti-corrosion performance: The material of the fiberglass filter has good acid, alkali, and corrosion resistance characteristics, which can efficiently filter strong acid and alkaline liquids.

2. Good high-temperature resistance: The fiberglass filter can withstand temperatures up to 120 ℃ and meet the filtration needs at high temperatures.

3. Efficient filtration: The fiber spacing of the fiberglass filter is uniform, which can avoid blockage and maintain stable filtration effect even under high flow conditions.

4. Low pressure difference: Due to its uniform fiber spacing, the flow resistance of the glass fiber filter element is small, which can reduce the pressure loss of the filtration system.

5. Easy installation: The outer surface of the fiberglass filter element is treated with colloidal silicon, which has good sealing and can be used directly, making installation convenient.

1. Special design can achieve an effective filtration area of 100%;

2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;

3. The design adopts a metal folding frame, which can be reused and replaced;

4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;

Special design can achieve an effective filtration area of 100%;

2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;

3. The design adopts a metal folding frame, which can be reused and replaced;

4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;

the hazards of hydraulic oil filter cloggingHuahang

1. The hydraulic oil filter element is blocked by the pump suction filter, which can cause insufficient pump suction, loud noise, heat generation, and then burn out.

2. The hydraulic oil filter element is a high-pressure circuit oil filter that is blocked, usually with an alarm and bypass valve. Otherwise, blockage can cause downstream components to move slowly or the oil cylinder to not move.

3. The hydraulic oil filter element is blocked by the return oil filter, which can cause the return oil to be blocked and the back pressure to increase. The oil cylinder moves slowly. But for general oil filters, there is a bypass valve. If the filter element is blocked, the hydraulic oil will directly return to the downstream circuit without passing through the filter element, which will affect the normal operation of the system.