Sinadarin Tace Mai Daidaito FAL-20-8 FLT-20-8

An ƙera harsashin tacewa na daidaici na FAL-20-8 da FLT-20-8 don samar da kyakkyawan aikin tacewa don aikace-aikacen masana'antu iri-iri.An yi waɗannan matatun ne da kayan aiki masu inganci kuma an tsara su da kyau don jure wa yanayi mai tsauri, wanda ke tabbatar da inganci da aminci.Akwatin tacewa namu mai daidaito yana da ingancin tacewa har zuwa kashi 99%, yana kawar da gurɓatattun abubuwa kamar datti, tsatsa, da sauran abubuwa masu guba daga ruwa.

WhatsApp Tuntube mu

Cikakkun Bayanan Samfura

Bayanin SamfuraBayyanar

Lambar sashi	FAL-20-8 FLT-20-8
Matatar tacewa	Gilashin fiberglass
Daidaiton tacewa	1~25μm
Zafin aiki	-20~+100℃
Kunshin	Kwali

Daidaitaccen Sinadarin Tace FAL-20-8 FLT-20-8guf

Fa'idodiBayyanar

Sinadarin matattarar matakin E9: ya dace da tace ruwa mai yawa da kuma condensates masu girman micron 3, wanda ke samar da babban adadin mai na 5ppm w/w

Sinadarin matattarar matakin E7: ya dace da tace ruwan ruwa da mai, yana iya tace ƙwayoyin da ke da ƙarfi kamar micron 1, kuma ya kai ragowar adadin foda mai na 1.0ppmw/w

Matattarar matakin E5: ya dace da tattara tururin ruwa mai ƙanƙanta da hazo mai, yana iya tace barbashi masu tauri kamar ƙananan microns 0.01, yana samun babban adadin man da ya rage na 0.01 ppmw/w, kuma yana cire kusan dukkan danshi, ƙura, da mai.

Akwatin matattarar matakin E3: ya dace da tattara tururin ruwa mai laushi da hazo mai, yana iya tace barbashi masu tauri kamar ƙananan microns 0.01, kuma ya kai yawan ragowar mai na 0.001ppmw/w

Sinadarin tacewa na matakin E1: ya dace da tace tururin mai da tururin hydrocarbon wanda gawayi mai shahara zai iya sha. Yana iya tace barbashi masu ƙarfi kamar ƙananan microns 0.01 kuma ya kai ragowar man da ke cikin 0.003ppmw/w. Ba ya ɗauke da danshi, ƙura, ko mai, ba shi da ƙamshi da ɗanɗano, kuma yana aiki azaman matattara ta ƙarshe.

Ma'aunin maye gurbin

Mitawar maye gurbin: Mitar maye gurbin ya bambanta dangane da yanayin amfani.Ana ba da shawarar masu amfani da gida su maye gurbinsa sau ɗaya a wata, masu amfani da kasuwanci kuma su maye gurbinsa duk bayan watanni biyu, kuma ana ba da shawarar masu amfani da masana'antu su maye gurbinsa duk bayan watanni uku.Bugu da ƙari, idan tasirin tacewar sinadarin tacewa ya ragu sosai, kamar raguwar kwararar ruwa ko lalacewar ingancin ruwa, ya kamata a maye gurbinsa cikin lokaci."

Faduwar matsi: Ga ma'aunin tace iska mai matsewa, ya kamata a yi la'akari da maye gurbinsa idan raguwar matsin lamba ta wuce 0.68kgf/cm² ko kuma lokacin da suka yi aiki na tsawon awanni 6000-8000 (kimanin shekara guda).

Yanayin ingancin ruwa: A cikin muhallin da ba shi da ingancin ruwa, yawan maye gurbin abubuwan tacewa ya kamata ya fi yawa saboda ana buƙatar tace datti a cikin ruwa akai-akai.Akasin haka, idan ingancin ruwan ya yi kyau, yawan maye gurbin zai iya raguwa.

Bayanan kulawa da sa ido: Ƙirƙiri tsare-tsaren maye gurbin da aka keɓance ta hanyar sa ido akai-akai kan yanayin aikin abin tacewa da kuma haɗa bayanan kulawa na baya.

ME YA SA ZAƁE MUBayyanar

Me yasa za mu zaɓa
1. Shugaban masana'antar tacewa ta cikin gida, ya wuce ISO9001:2008, CE, SGS da sauran takaddun shaida da yawa
2. Muna da ƙwarewa a fannin fitarwa sama da shekaru 9, muna da garantin inganci mai kyau da ƙarancin farashi.
3. Ana sayar da kayayyaki a ƙasashe 68 a faɗin duniya
4. Sarrafa samfura na musamman, injiniyan sabis ɗaya-da-ɗaya
Sabis na kan layi na awanni 5.24 na sabis na abokin ciniki