Tace Foda Mai Tsabtace Titanium 500 50.5x88

Matatar mu mai kauri 500 ta titanium sintered foda tana da girman 50.5x88mm kuma an tsara ta ne don samar da tacewa mai inganci don aikace-aikace daban-daban. An yi wannan matatar ne da kayan titanium masu inganci, wanda ke da juriyar tsatsa da dorewa mai kyau, wanda ke tabbatar da aiki na dogon lokaci.

Nau'i Sinted Foda Tace Sintered
Diamita na waje 50.5 mm
Tsawo 88 mm
Matsakaicin tacewa Ramin 500
Matatar tacewa Titanium
Kunshin Kunshin kwali na tsaka tsaki
An yi shi na musamman Akwai

WhatsApp Tuntube mu

Bayanin SamfuraBayyanar

Girma	50.5x88 mm
Matatar tacewa	Titanium
Nau'i	Sinted foda tace abu
Daidaiton tacewa	Ramin 500
An yi shi na musamman	Akwai

SiffofiBayyanar

2. Kowane sashi yana amfani da hanyar haɗakarwa mara matsala, wadda ke magance matsaloli da yawa da suka wanzu a da kuma tabbatar da aminci;

3. Tsarin ya ɗauki firam ɗin naɗewa na ƙarfe, wanda za a iya sake amfani da shi a maye gurbinsa;

4. Yawan kayan matattarar yana nuna ƙaruwar tsari, yana samun babban inganci, ƙarancin juriya, da kuma ƙarfin ƙura mai yawa;

Tsarin musamman zai iya cimma ingantaccen yanki na tacewa na 100%;

2. Kowane sashi yana amfani da hanyar haɗakarwa mara matsala, wadda ke magance matsaloli da yawa da suka wanzu a da kuma tabbatar da aminci;

3. Tsarin ya ɗauki firam ɗin naɗewa na ƙarfe, wanda za a iya sake amfani da shi a maye gurbinsa;

4. Yawan kayan matattarar yana nuna ƙaruwar tsari, yana samun babban inganci, ƙarancin juriya, da kuma ƙarfin ƙura mai yawa;

Babban ingancin rabuwa: Sinadarin matattarar titanium sintered yana da tsari iri ɗaya da kuma rarrabawar ƙananan ramuka, wanda ke sa ingancin rabuwarsa da daidaiton tacewa ya yi yawa.

Ƙarancin juriyar tacewa: babban porosity, ƙarancin juriya ga tacewa, ingantaccen aiki mai ƙarfi, sauƙin busawa, tsawon rai na sabis.

Juriyar zafin jiki mai yawa: Yawanci ana iya amfani da shi a ƙasa da 280 ° C zuwa 300 ° C, kuma wasu ma ana iya amfani da su a yanayin zafi mai zafi na 500-600 ° C.

Kyakkyawan kwanciyar hankali na sinadarai: yana da juriya ga lalata acid da alkali, tare da manyan kaddarorin antioxidant.

Kyakkyawan aikin injiniya: ana iya tace shi ta hanyar matsi ko tsotsa, mai sauƙin aiki, kuma ana iya sake farfaɗo da shi akai-akai kuma a yi amfani da shi

1. Ingancin tacewa: Matatun fiberglass suna da ƙananan girman ramuka, waɗanda zasu iya tace ƙananan barbashi da ƙazanta a cikin ruwa, wanda hakan ke inganta ingancin ruwa sosai.

2. Juriyar Tsabtace Sinadarai: Matatun Fiberglass suna da halaye kamar juriyar acid, juriyar alkali, da juriyar zafin jiki mai yawa, kuma ana iya amfani da su akai-akai a cikin muhallin sinadarai.

3. Tsawon rai na aiki: Matatun fiberglass galibi suna da tsawon rai na aiki fiye da matatun yau da kullun, yawanci suna kaiwa fiye da watanni shida.

4. Mai sauƙin kulawa: Kula da matatar fiberglass abu ne mai sauƙi, yana buƙatar tsaftacewa ko maye gurbinsa akai-akai, kuma farashin kulawa yana da ƙasa kaɗan.

daidaitaccen sigaBayyanar

1. Sinadarin tace foda shine babban ɓangaren matatar. Sinadarin tace foda ya ƙunshi kayan aiki na musamman kuma ɓangare ne mai rauni wanda ke buƙatar kariya ta musamman da kulawa.

2. Bayan matatar da ke cikin tsarin ta yi aiki na ɗan lokaci, sinadarin matatar da ke cikin foda da ke cikin matatar ya kama wani adadi na gurɓatattun abubuwa da ƙazanta. A wannan lokacin, matsin lamba yana ƙaruwa, saurin kwararar ruwa yana raguwa a hankali, kuma mai watsawa zai tunatar da ƙararrawa. A wannan lokacin, ya zama dole a tsaftace ƙazanta a cikin sinadarin matatar da ke cikin foda da kyau a kan lokaci, kuma ana buƙatar a tsaftace sinadarin matatar da ke cikin foda da kyau.

3. A lokacin tsaftace sinadarin tace foda, dole ne mu yi taka tsantsan kada mu lalace ko mu lalata shi. In ba haka ba, ba za a iya sake amfani da shi don guje wa shafar ingancin tacewa da kuma haifar da lahani ga tsarin gaba ɗaya ba.

Kayan aiki: Ana yin harsashin tace sinadarin titanium mai tsafta sosai da foda titanium na masana'antu (mataki na 0) a matsayin kayan da aka yi da shi, wanda ake yin sa a ƙarƙashin matsin lamba mai yawa da zafin jiki mai yawa. Wasu samfuran ana iya haɗa su da foda na bakin ƙarfe (kamar 316L) ko foda na ƙarfe don inganta aiki.

Daidaiton tacewa: Daidaiton tacewa na harsashin tace titanium sintered shine 0.1 μm zuwa 100 μm, ya danganta da buƙatun aikace-aikacen.

Girman: Tsawon abin tace titanium sintered shine 50mm zuwa 1000mm, kuma faɗin waje shine 8mm zuwa 100mm. Matsakaicin diamita shine 14mm zuwa 200mm, kuma ana iya daidaita takamaiman girman gwargwadon buƙata.

Rarrabuwa: Porosity yawanci yana tsakanin 28% zuwa 50%, ya danganta da yanayin amfani da shi da halayen ruwa.

Ƙarfin matsi: Matsakaicin ƙarfin matsi yana daga 0.5MPa zuwa 1.5MPa, wanda ya dace da yanayin matsin lamba daban-daban na aiki.

Juriyar yanayin zafi: Katunan tacewa na titanium na iya aiki a ƙasa da 300 ℃, kuma a wasu aikace-aikace, suna iya aiki a ƙasa da 280 ℃

1. Gida: Matatar fiberglass ta dace da masu tace ruwa, na'urorin rarraba ruwa, da sauran kayan aiki a gidaje. Tana iya tace ƙananan ƙwayoyin cuta, ragowar chlorine, ƙamshi, da sauran gurɓatattun abubuwa a cikin ruwa, tana inganta ingancin ruwan sha.

2. Masana'antu: Ana amfani da matatun fiberglass sosai a fannoni kamar sarrafa ruwa, tsaftace ruwan shara, da kuma shirya ruwa mai tsafta, kuma suna iya cire gurɓatattun abubuwa daban-daban daga ruwa.

3. Likitanci: Matatun fiberglass suma sun dace da amfani a fannin likitanci, kamar tsarkake ɗakin tiyata da kuma tsarkake ruwan dakin gwaje-gwaje a asibitoci.