Replace Male Oil Filter PI9730 DRG VST 300
Product Specifications
Huahang
Type
Hydraulic oil filter element
Filter layer
fiberglass/stainless steel
PART NUMBER
PI9730 DRG VST 300
working temperature
-20~+110℃
Filtration accuracy
1~25 micron
Type |
Hydraulic oil filter element |
Filter layer |
fiberglass/stainless steel |
PART NUMBER |
PI9730 DRG VST 300 |
working temperature |
-20~+110℃ |
Filtration accuracy |
1~25 micron |
related part number
Pi8245Drg25 77711187 Pi1030KS-Mic25 78268625 Pi9630Drgvst200 77741085 Pi8715Drg300 77711146
Pi5215PSvst6 77955123 Pi8205Drg25 77680911 Pi9105Drgvst10 77689102 Pi9611Drgvst200 77668544
Pi4130PS25 77680481 Pi9408Drgvst60 77689227 Pi2111PS3 77680150 Pi9805Drgvst500 77740947
1. Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
Special design can achieve an effective filtration area of 100%;
2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;
3. The design adopts a metal folding frame, which can be reused and replaced;
4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;
working principle
Huahang
0110R003BNHC 0110R005BNHC 0110R010BNHC 0110R020BNHC
0110R003BN3HC 0110R005BN3HC 0110R010BN3HC 0110R020BN3HC
0110R003BN4HC 0110R005BN4HC 0110R010BN4HC 0110R020BN4HC 2. Acid cleaning method
Dissolve potassium dichromate or crystals in water to 60 to 80 degrees, and slowly add concentrated sulfuric acid with a concentration of 94% until sufficient. Add slowly and stir. Add up to 1200 milliliters of potassium sulfate or completely dissolve, and the solution will appear dark red in color. At this time, the rate of adding concentrated sulfuric acid can be accelerated until it is completely added. If there are still undissolved crystals after adding concentrated sulfuric acid, they can be heated until dissolved. The function of cleaning solution is to remove general pollutants, grease, and metal particle impurities on the wall of stainless steel filter cartridge, and it can effectively kill the bacteria and microorganisms that grow on the filter cartridge and damage the heat source. If the filter element has been alkaline washed before, the alkaline solution must be washed first, otherwise fatty acids will precipitate and contaminate the filter elementSFN-02-60K SFN-02-100K SFN-02-150K SFN-02-200K
