Inner Thread Titanium Sintered Filter Element

The titanium sintered filter element undergoes a high-temperature sintering process to form a microporous structure, ensuring effective filtration of liquids and gases. The pore size range of this filter element is 0.2 micron, which can effectively remove impurities such as dirt, bacteria, and other suspended particles in the process flow.

Type Sintered Powder Filter Element
Dimension 18x20
Filter media Titanium
Filtration accuracy 0.2μm
Origin Henan,China

Product SpecificationsHuahang

Working temperature	-20~+110℃
Filter layer	Titanium
Type	Sintered powder filter element
Filtration accuracy	0.2μm
Package	Neutral package

Inner Thread Titanium Sintered Filter Element

FeaturesHuahang

2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;

3. The design adopts a metal folding frame, which can be reused and replaced;

4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;

Special design can achieve an effective filtration area of 100%;

2. Each component adopts a seamless fusion method, which solves many problems that originally existed in use and ensures safety;

3. The design adopts a metal folding frame, which can be reused and replaced;

4. The density of the filter material shows an increasing structure, achieving high efficiency, low resistance, and large dust capacity;

Corrosion resistance: Titanium metal itself has extremely high chemical stability and can exhibit good corrosion resistance in organic acids, inorganic acids, organic compounds, and alkaline solutions.

High temperature resistance: Titanium sintered filter cartridges can maintain stable performance at temperatures up to 300 ° C, making them suitable for various high-temperature filtration scenarios.

Mechanical properties: Titanium sintered filter cartridge has excellent mechanical properties and is suitable for pressure filtration and extraction operations, with easy operation.

Permeability: With high porosity, low filtration resistance, and high permeability efficiency, it is suitable for solid, liquid, and gas separation and purification of various media

1. Efficient filtration: Fiberglass filters have very small pore sizes, which can filter out small particles and impurities in water, greatly improving water quality.

2. Chemical corrosion resistance: Fiberglass filters have characteristics such as acid resistance, alkali resistance, and high temperature resistance, and can also be used normally in chemical environments.

3. Long service life: Fiberglass filters usually have a longer service life than ordinary filters, usually reaching more than six months.

4. Easy to maintain: The maintenance of fiberglass filter is relatively simple, only requiring regular cleaning or replacement, and the maintenance cost is relatively low.

problem and solutionsHuahang

1. The powder sintered filter element is the core part of the filter. The powder sintered filter element is composed of special materials and is a vulnerable part that requires special protection and maintenance.

2. After the filter in the system has been working for a period of time, the powder sintered filter element in the filter has intercepted a certain amount of pollutants and impurities. At this time, the pressure increases, the flow rate gradually decreases, and the transmitter will remind the alarm. At this time, it is necessary to clean the impurities in the powder sintered filter element in a timely manner, and the powder sintered filter element needs to be cleaned.

3. During the process of cleaning the powder sintered filter element, we must be careful not to deform or damage it. Otherwise, it cannot be used again to avoid affecting the filtration efficiency and causing damage to the entire system.

Appearance quality issue: There may be large areas of yellow or rust spots on the surface of the titanium rod sintered filter element. The reason for these problems is the uneven distribution of carbon content on the surface of the filter element, usually caused by the introduction of carbon elements into titanium tetrachloride during the production process. The solution includes using ultrasonic cleaning or chemical cleaning (such as acid washing or alkali washing) to remove surface contaminants.

Installation and sealing issues: During installation, it is necessary to ensure that the filter element is installed vertically and check whether each sealing ring is in place to avoid missing or misplaced sealing rings. After installation, there should be a 15 to 20 minute cleaning and inspection process, using circulating water to clean until the inspection is qualified.

Working pressure control: The normal working pressure should be controlled between 0.15 and 0.25 Mpa, and the working differential pressure should be controlled below 0.45 Mpa. If the pressure exceeds this value, timely backwashing or backwashing operations should be carried out to maintain the filtration efficiency of the filter core.

Anti cleaning and maintenance: It is recommended to perform a backwash before the end of each shift, with a backwash time of 10 to 20 minutes each time. The backwash pressure should be gradually increased to 0.25 to 0.3 Mpa. When the filter element is severely clogged, ultrasonic cleaning, acid washing, alkali washing and other methods can be used

1. Home: Fiberglass filter is suitable for water purifiers, water dispensers, and other equipment in homes. It can filter out small particles, residual chlorine, odors, and other pollutants in water, improving the quality of drinking water.

2. Industry: Fiberglass filters are widely used in industrial fields such as water treatment, wastewater treatment, and high-purity water preparation, and can remove various pollutants from water.

3. Medical: Fiberglass filters are also suitable for use in the medical field, such as operating room purification and laboratory water purification in hospitals.